Short answer: Soft washing uses low pressure (similar to a garden hose) plus biodegradable cleaners to kill and dissolve algae, mould and mildew; pressure washing uses high-pressure water — often heated — to physically blast off dirt, oil and stains. Use soft washing on siding, stucco, roofs, painted wood and soft or heritage masonry; use pressure washing on concrete, interlock and other hard, durable surfaces.
What is soft washing?
Soft washing applies a cleaning solution at low pressure, lets it dwell so it can break down organic growth, then rinses gently. Because the chemistry does the work, it reaches algae and mould spores that pressure alone only knocks off the surface — so results last longer.
What is pressure washing?
Pressure washing relies on mechanical force. Professional units deliver high pressure and high flow, and hot-water machines (often called "power washing") cut through oil, grease, gum and tire marks far faster than cold water.
Which method for which surface?
| Surface | Recommended method | Why |
|---|---|---|
| Vinyl and aluminium siding | Soft wash | High pressure forces water behind panels and can crack or dent them. |
| Stucco and EIFS | Soft wash | Pressure can gouge the finish and drive water into the wall. |
| Asphalt shingle, cedar or ceramic roofs | Soft wash | Pressure strips granules, splits shakes and can void warranties. |
| Wood decks and fences | Low pressure / soft wash | High pressure raises and furrows the grain. |
| Heritage or soft brick and stone | Soft wash, steam or gentle media blasting | Pressure erodes the brick face and washes out mortar. |
| Concrete driveways and garage floors | Hot-water pressure wash | Durable surface; heat lifts oil and grease. |
| Interlock and pavers | Pressure wash with surface cleaner, then re-sand | Removes moss and staining; joints are re-filled afterwards. |
| Commercial sidewalks and plazas | Hot-water pressure wash | Removes gum, grease and heavy foot-traffic grime. |
What happens when the wrong method is used?
- Etched "wand marks" and stripes in concrete
- Sand blown out of interlock joints, leading to weeds and shifting
- Mortar washed out of brick joints, letting water in
- Water forced behind siding and into window seals
- Shingle granules stripped, shortening roof life
Most homes need both
A typical GTA home combines a soft-washed house, roof and deck with a pressure-washed driveway and walkway. A professional crew will tell you which surface gets which method before work starts.
Need help with your property?
Living Water has cleaned and restored 7,500+ properties across Toronto and the GTA since 1998. Call (416) 663-8000 or request a free quote.

