- Abrasive blasting
- Driving a stream of abrasive media (sand, glass, garnet, soda, walnut shell and others) at a surface under pressure to strip rust, paint, scale or coatings. Learn more →
- Acid wash
- Cleaning masonry with a diluted acid-based cleaner to dissolve mortar smears and mineral stains. It must be tested, correctly diluted and neutralised. Learn more →
- Anti-graffiti coating
- A clear protective coating that makes graffiti easier to remove. Sacrificial coatings come off with the graffiti; permanent coatings stay in place. Learn more →
- Buffer (elevator)
- The spring or oil device at the bottom of an elevator pit that stops a car or counterweight travelling past its normal limit. Pit debris and corrosion around buffers is a common clean-up item. Learn more →
- Dry ice blasting
- Blasting with frozen carbon dioxide pellets that turn to gas on impact, removing coatings and residue without leaving abrasive media behind. Learn more →
- Dustless blasting
- Wet abrasive blasting where water is mixed with the media to suppress airborne dust. Learn more →
- Efflorescence
- A white, powdery salt deposit left on brick, concrete, stone or pavers when water moves through the material and evaporates at the surface. Learn more →
- Elevator pit
- The space at the bottom of an elevator hoistway, below the lowest landing, housing buffers and other equipment. It collects debris, water and oil. Learn more →
- Hot-water pressure washing
- Pressure washing with heated water, often called power washing, which cuts through oil, grease and gum faster than cold water. Learn more →
- Hydro jetting
- Using very high-pressure water streams to scour build-up from inside pipes, condensers and lines. Learn more →
- Lime run
- Hard white calcium carbonate deposits that streak from mortar joints, harder to remove than ordinary efflorescence. Learn more →
- Micro blasting
- Precision blasting with very fine media at low pressure, used on detailed or delicate masonry and stubborn coatings. Learn more →
- Poultice
- A paste applied to stone or brick that draws stains or paint ghosting out of the pores as it dries. Learn more →
- Polymeric sand
- Joint sand for interlock pavers mixed with binders that harden when misted with water, resisting washout and weeds. Learn more →
- Pressure washing
- Cleaning with high-pressure water to remove dirt, grime and stains from durable surfaces like concrete and interlock. Learn more →
- Soda blasting
- Blasting with sodium bicarbonate, a soft media suited to delicate surfaces, soot and light coatings. Learn more →
- Soft washing
- Low-pressure cleaning that uses biodegradable cleaners to kill and remove algae, mould and mildew from siding, stucco and roofs. Learn more →
- Spalling
- Flaking or popping of the surface of brick, stone or concrete, often caused by trapped moisture freezing and thawing. Learn more →
- Sump pump
- A pump in a pit or basin that removes collected water. In elevator pits, sumps must be covered and working to prevent flooding. Learn more →
- Surface cleaner
- A rotary attachment for pressure washers that cleans flat surfaces evenly without the stripes a bare wand leaves. Learn more →
- WSIB clearance certificate
- A document from Ontario's Workplace Safety and Insurance Board confirming a contractor's account is in good standing. Learn more →
Reference
Pressure Washing & Restoration Glossary
Plain-English definitions of the terms used in pressure washing, blasting, masonry restoration and elevator pit cleaning.
- Since 199828 years in business
- 7,500+properties cleaned
- $5Mliability insured
- WSIBcovered & ISSA-GBAC
- 4.9 / 5rated on Google
Is your property looking tired?
Toronto & GTA · typically booked within 2–5 days. Emergency and disaster restoration answered 24/7 on (647) 833-4343.
- Free no-obligation assessment
- Fixed written quote before any work starts
- Certificate of insurance and WSIB clearance supplied
- Re-clean guarantee
