Short answer: The safest way to remove paint from brick is a chemical paint stripper matched to the coating, left to dwell (often under a cover), then removed with low-pressure rinsing or scraping — with gentle micro or soda blasting only for stubborn residue. Avoid high-pressure washing and coarse sandblasting, which strip the brick's fired face and lead to water damage.
Start with a test patch
Paint type, the number of layers and the brick itself all affect results. A small test area shows which stripper works, how long it needs, and whether any ghosting will remain — before the whole wall is committed.
Methods compared
| Method | Risk to brick | Notes |
|---|---|---|
| Chemical stripper + low-pressure rinse | Low | The standard approach for most painted brick. |
| Micro / soda blasting | Low–medium | For residue in pores and textured brick, at controlled pressure. |
| Steam | Low | Helps soften some coatings on heritage masonry. |
| High-pressure washing alone | High | Rarely removes paint and erodes brick and mortar. |
| Coarse sandblasting | Very high | Destroys the brick face; avoid on clay brick. |
Lead paint
Older buildings may have lead-based paint. It must be removed with containment and proper waste handling — not dry-scraped or blasted into the open air.
After paint removal
Once stripped and rinsed, brick should be left breathable. Repointing failed mortar joints and fixing water sources helps the restored brick last.
Need help with your property?
Living Water has cleaned and restored 7,500+ properties across Toronto and the GTA since 1998. Call (416) 663-8000 or request a free quote.

